Bosch GSB 500W 10 RE Professional Tool Kit (Blue, Pack of 100)

5,170.00 (as of May 20, 2018, 7:04 am) & FREE Shipping. Details 2,749.00

Bosch GSB 10 RE Professional Tool Kit (Blue, Pack of 100) An Honest Review

BOSCH GSB 10 RE Home kit

BOSCH GSB 10 RE Home kit

Features: – Forward/reverse rotation – Electronic control for exact pilot drilling – Rotating brush plate for constant power in reverse and forward rotation – Higher dynamic load rated ball bearing for long life – Ergonomic handle for comfortable use


Specifications: – Rated power input 500 W – No-load speed 0 – 2600 rpm – Power output 250 W – Weight without cable 1.5 kg (Drill only) – Drill spindle connecting thread 3/8” – 24 UNF – Chuck capacity 1 – 10 mm – Impact rate at no-load speed 0 – 41600 bpm – Drilling dia. in concrete 10 mm – Drilling dia. in wood 20 mm – Drilling dia. in steel 8 mm Contents: – Plastic carry case – 1pc – Drill bit – masonry – 5 pcs – 4,5,6,8,10mm – Drill bit – metal – 5 pcs – 2,3,4,5,6mm – Drill bit – wood – 4 pcs – 4,5,6,8mm – Claw hammer with rubber grip- 1pc – Screw driver bit set – 10 pcs – PH1,PH2,PZ1,PZ2,S4,S6,H4,H5,T20,T25 – Screw driver adaptor magnetic – 1pc – to fit above bits with the machine – Sockets – 7pcs – 4,5,6,7,8,9,10mm – Nut driver adaptor 1/4inch – 1 pc – to fit above sockets with the machine – Measuring tape 3m – 1pc – Combination pliers 6inch -1pc – Adjustable wrench – 6inch 1pc – Adjustable knife – 1inch – 1pc – Screws – 3mm – 10pcs, 4mm – 10pcs, 5mm -10pcs – Fischer Nylon Fixings – 4mm – 10pcs, 6mm – 10pcs, 8mm – 10pcs – Sprit level – 3 directional – 1pc – Keyed chuck – 1pc

Item Weight: 3.73 Kg (Total)

Contents of BOSCH GSB 10 RE Home kit

This is Two-in-one Drill

The powerful 500 W drill delivers that exact amount of power and support that you would need when you are repairing and completing tasks around the house. It features a compact and lightweight design and can easily be even used when working in tight spaces. The lightweight design makes the drill comfortable to carry and less tiring when you are working.

It has a Claw Hammer

A useful tool that you can use when you have to fix a chair or repair a painting frame. One side can be used to drive the nails into wood surfaces while the claw end can be used to lever the nails out.

The Screwdriver Bits

These bits are the answer to all your rotary related repairs and DIY projects needs. They can be used to screw and unscrew nails and plugs into and from any surface.

An Adjustable Wrench

Be it fixing the leaky faucet or tightening the sink pipe, this adjustable wrench will get the job done. It is a spanner with an adjustable jaw that is compatible with different sized nuts and bolts.

A Spirit Level

Hang your paintings perfectly using this spirit level. It can be used to see if the surface is leveled or not, making it ideal to be used in DIY masonry and wood work projects.

Metal Drill Bits

If you are working with metal, then these drill bits are perfect for drilling holes and getting the work done quickly.

Adjustable Knife

Instead of having to rely on crude methods to cut through items, you can use this multi-purpose utility knife that can help you in any cutting-related work.

Masonry Drill Bits

Hammering a nail into a wall can crack the wall. Instead you can use these drill bits to drill neat holes into concrete walls so that you can fit a wall fixture, clock or a painting.

Wood Drill Bits

These are specially designed for wood-related works and come in handy when you are working on DIY wood projects such as a new chair for the law or a crib for the baby.

Socket Wrench

You can use this to tighten or loosen nuts when you are setting up your TV stand, night stand or coffee table.

Combination Plier

You can use this multi-purpose plier for a variety of tasks such as twisting, bending and cutting wires and cables. This tool can come in handy when you are working on electrical projects and repairs.

Screws & Plugs

These are of different usages and sizes and can be mainly used along with your drilling work and projects.

Nut/Screwdriver Bit Holder

With this holder in hand, you can easily change the bits, thanks to its magnetic tip. It fits all standard bit sizes and ensures a strong magnetic lock that prevents from the bits from falling off while you are working.

Measuring Tape

Another handy tool that comes useful when you are working on DIY projects that require accurate measurements. This tape can be used to find the right dimensions in a very simple and easy way.

Key Chuck

You can easily insert and remove drill bits using this key chuck. Having this tool nearby is helpful as you can switch between different drill bits when you are working with different surfaces.

GSB 10RE Drill

This functional drill comes with a host of features and options that make it quite easy to work with.

Forward/Reverse Mode

You can use this mode to easily and quickly shift between clockwise and anticlockwise drilling depending on your repair/work requirements. The forward mode can be used to drill into the surface while the reverse mode can be used to drill out of the same surface. This mode can be activated using the switch found at the bottom centre of the drill.

Pilot Drilling

You can easily manage the size of the pilot hole that you are intending to drill into a surface using the efficient electronic control technology. It ensures that the drill is fully guided with precision and exactness while drilling, so as to get your work done in the first go itself.

Rotating Brush Plate

When you are working on projects that require a lot of nails and you can use the drill’s forward/reverse function to insert and remove nails, screws and bolts. But with the rotating brush in place, an easy rotary action is delivered, that facilitates an easy switching between the forward and reverse modes while screwdriving.

Control Speed

While you are using the continuous drill mode when working on a drilling project, you can ensure a consistent drilling performance by adjusting the speed and locking it to the desired speed. This can be done using the small black switch located on the handle and will help you while you are working on projects that require constant and consistent drilling speed.

Uses of kit

Watch the video to check it uses:

This drill comes with an ergonomic design that sits comfortably in your hand while you are working.

1. Use the Drill to Fix Doorknobs

You can use the GSB 10RE to fix door knobs on doors. This drill will allow you to attach new doorknob or repair the existing one so that you can securely close the door.

2. Use the Drill to Install a Showpiece Rack

You can easily install a wall-mounted rack to display your showpiece items with the help of the drill. You can use the spirit level to ensure that the holes are on the same level, while the drill can be used to securely fix the showpiece rack in place.

3. Use the Drill to Install a Security Camera, etc

This drill can also be used to drill holes to fix security cameras in and around the house. You can use the drill, hammer and other accessories to ensure a secure fit.

Should You Buy BOSCH GSB 10 RE Kit OR NOT?

Check out some Ratings on Amazon vs Flipkart for BOSCH GSB 10RE:

If you see that in above ratings the product has got an overall (4.3 stars out of 5.0) which is very very Good. Also, if it says hat 1247 people have rated means that around 12000 units have been sold on this website Estimated at X10 (one in ten people used to rate the product), and around 11000 units on flipkart and many on other websites as well. Majority of them have given 4/5 Stars to the product quality and usefullness.

So the BOSCH GSB 10RE product is quite a good selling, perfect for home and useful for all your needs.

I Definitely Recommend this TOOL KIT to BUY. 

Here I had provided you with some buying links where you can check out the discounted price of this product.




Robust and powerful 500 w motor, electronic control, ergonomic handle, rotating brush plate.
For any queries please contact Customer Service Number – 1800-425-8665 (Toll free)
Warranty – 6 months from the date of invoice (provide invoice copy to claim warranty)
No-load speed : 0 to 2600 rpm
Drilling diameter: 10 millimeters for concrete and masonry; 8 millimeters for steel; 20 millimeters for wood
Material: MS and Plastic
Chuck capacity : 1 to 10 millimeters
Impact rate : 0 to 41600 bpm
1/2 inch drill spindle connecting thread
Power: 500 watts (Input) and 250 watts (Output)


There are no reviews yet.

Be the first to review “Bosch GSB 500W 10 RE Professional Tool Kit (Blue, Pack of 100)”

Your email address will not be published. Required fields are marked *